Using Interface Dial To Change Destination; Entering A Destination From The Menu Screen (While On Route) - Acura 2007 RDX Manual

Using Interface Dial to Change
Destination
While following a calculated route, you
can select a new destination with the
map screen and the Interface Dial.
With the map screen displayed, use the
Interface Dial to move the position
icon. It will change to cross hairs. Use
the Interface Dial to position the cross
hairs on your desired new destination,
then push in on the Interface Dial. The
address within the cross hairs will be
displayed. If this is not your desired new
destination, reposition the cross hairs
with the Interface Dial, then push in
on the Interface Dial again to see the
new address.
When you push in on the Interface
Dial on a new destination, you will see a
pop-up menu as well as the address
display. You can say or select either Set
as Dest., or Set as Waypoint. The
system will return to the map screen
and recalculate the route to your new
destination or waypoint.
NOTE:
When you scroll the map screen while
on route to a destination, some voice
controls will not function. These
include:
• Display "Heading up"
• Display "North up"
Driving to Your Destination
Entering a Destination from the
Menu Screen (while on route)
If you say "Menu" or press the MENU
button twice, the system displays the
Enter destination by screen. Follow
the procedure described in Entering a
Destination, which begins on page 27.
After selecting OK to the Calculate
route to screen, your new location can
be used either as a waypoint or as a
replacement destination.
Navigation System 73