Table of Contents
Advertisement
Changing Your Destination
There are four methods by which you
can change or add a waypoint to your
route. These are:
Find Nearest (Voice command)
From the map screen, say one of the
"Find Nearest..." voice commands to
locate the nearest gas station, ATM,
restaurant, or other point of interest. See
the "Find Nearest" voice commands
listing on page 148.
Go Home (Voice command)
From the map screen, say "Go home."
If you have entered a "Go home"
address, then the system will display a
confirmation screen.
Using Interface Dial to Change
Destination
While following a calculated route, you
can select a new destination with the
map screen and the Interface Dial.
With the map screen displayed, use the
Interface Dial to move the position
icon. It will change to crosshairs. Use
the Interface Dial to position the
crosshairs on your desired new
destination, street, or icon, then push in
on the Interface Dial. The Select a
place screen or a pop-up menu will be
displayed.
NOTE:
The Select a place screen will be
displayed when the crosshairs are
positioned near multiple icons or
locations. A pop-up menu will be
displayed when the crosshairs are
positioned on a particular street, icon,
or location.
Driving to Your Destination
If this is not your desired new
destination, press the CANCEL button
or the NAVI BACK button to return to
the map screen. Reposition the
crosshairs with the Interface Dial, then
push in on the Interface Dial again to
see the new address.
Navigation System
73
Advertisement
Table of Contents
