Connecting With A Scart Cable - Philips VR740/02 User Manual

1.
1.
Switch off your TV set.
2.
2. Remove the aerial
cable plug from your
TV set. Insert it into the
AERIAL at the back of
the video recorder.
3.
3.
Insert one end of the
supplied aerial cable
into the RF OUT at
the back of the video
recorder and the
other end into the
aerial input socket at the back of the TV set.
4.
4.
Plug in a scart
cable into the
scart socket AV1
(TV) at the back of
the video recorder and the scart socket on
the TV set reserved for the video recorder
operation (see TV set operating instructions).
My TV set has several scart sockets. Which
one should I use?
Please see the operating instructions of your TV
set to find out which socket supports 'Easy
Link'.
5.
5. Switch on the TV set.
6.
6.
Insert AC cable into the wall socket.
7.
7.
Switch on this video recorder.
8.
8. The following screen will appear on the TV
screen.
PLEASE CONNECT AERIAL OR
CABLE TO THE VCR
THEN...
PUSH P + KEY
OR...
FOR PLAY ONLY - PUSH PLAY
The video recorder does not find any TV
channels during the search
* Select channel 1 on the TV. Can you see the
saved TV channel on the TV?
If not, check the cable connection of the aerial
(aerial socket), video recorder, TV.
* The video recorder searches the entire fre-
quency range in order to find and save the
largest possible number of TV channels.
Then, read the paragraph 'Preparation for use' in
the chapter 'Installing your video recorder'.
AERIAL
)
AV 1 (TV
AUD IO
OUT PUT
L
AER IAL
RF OU T
R
)
AV 1 (TV
RF OUT
AUD IO
OUT PUT
L
AER IAL
RF OU T
R
)
AV 1 (TV
AUD IO
OUT PUT
L
AER IAL
AV1 ( TV )
RF OU T
R

Connecting with a scart cable

Have the following
cables ready:
an aerial cable (1, sup-
plied), a scart cable (2,
not supplied).
1.
1. Remove the aerial
cable plug from your
TV set. Insert it into
the AERIAL at the
back of the video
recorder.
2.
2. Insert one end of
the supplied aerial
cable into the RF
OUT at the back of
the video recorder
and the other end
into the aerial
input socket at the back of the TV set.
3.
3. Plug one end of a
scart cable into
the scart socket
AV1(TV) at the
back of the video
recorder and the other end into the suitable
scart socket on your TV reserved for the
video recorder operation (see your TV's oper-
ating instructions).
4.
4.
Switch on the TV.
5.
5.
Insert AC cable into the wall socket.
My TV has several scart sockets. Which one
should I use?
Select that scart socket which is suited for the
video output as well as for the video input.
My TV has a configuration menu for the
scart socket.
Please configure this scart socket as Input-
Output.
6.
6.
If the connection was properly made and
your TV was automatically switched to the
programme number for the scart socket, you
will see the following picture:
PLEASE CONNECT AERIAL OR
CABLE TO THE VCR
THEN...
PUSH P + KEY
OR...
FOR PLAY ONLY - PUSH PLAY
5
1
AERIAL
)
AV 1 (TV
AUD IO
OUT PUT
L
AER IAL
RF OU T
R
)
AV 1 (TV
RF OUT
AUD IO
OUT PUT
L
AER IAL
RF OU T
R
)
AV 1 (TV
AUD IO
OUT PUT
L
AER IAL
AV1 ( TV )
RF OU T
R
2
EN