Installing Your Video Recorder; Initial Installation; Allocating A Decoder - Philips VR605/02 User Manual

2.

INSTALLING YOUR VIDEO RECORDER

Initial installation

a
Open up the battery compartment of your remote control
and place the batteries in it as shown in the picture.
b
Close the battery compartment.
c
Confirm the picture on the TV screen with the
on the remote control.
d
If you have connected the aerial to the video recorder,
press the button. 'Autoinstall' starts. This picture will
OK
appear on the screen:
AUTOINSTALL
Wait until all TV channels have been found. This can take
several minutes.
e
When 'AUTOINSTALL' is complete, 'READY' will appear
on the TV screen.
D If the autoinstall procedure is interrupted by the
standby button, press the MENU button to obtain the
welcome screen again.
f
To end, press the
MENU
The initial installation is now complete.
Check the time and date. Please read 'Setting the time
and date' in this chapter.
D If you have connected a decoder, you must install it
as described in the next section.
D If you have connected a satellite receiver, please
read the section 'satellite receiver'.
6
button
OK
00
button.

Allocating a decoder

Some TV stations will send coded TV channels, that you can
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your video recorder. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Choose the television channel on which you wish to use
the decoder with the
recorder or the number buttons
control.
c
Press the button on the remote control. The main
MENU
menu will appear.
d
Select the line 'MANUAL SEARCH' with the
P r button.
e
Confirm with the
OK
f
Press the button. 'DEC' will appear in the
INDEX E
display.
g
Confirm with the
OK
h
To end, press the
OK
STANDBY m button.
This channel is now assigned to the decoder.
or buttons on the video
P q P r
on the remote
0-9
P q
button.
CH21
button.
button again. Then, press the
or