Problems And Solutions - Villaware BVVLESSL01 Instruction Manual

problems and solutions

PROBLEM
Espresso does not come out.
Espresso comes out around the
edge of the filter holder.
No steam is generated.
Milk is not foamy after frothing.
Espresso comes out too quickly.
Espresso is too weak.
consumer affairs
Holmes Products (Europe) Ltd.
1
Francis Grove
1
London SW 9 4DT
England
Fax: +44 (0)20 8947 8272
Email: enquiriesEurope@jardencs.com
UK - Free phone Customer Service Helpline – 0800 052 36
SOLUTION
• Add water.
• Grind espresso grounds to a more coarse level.
• Fill filter with less espresso grounds.
• Plug unit into electrical outlet and turn on.
• Wipe off rim.
• Fill with less coffee.
• Fill reservoir with correct amount of water.
• Turn on unit and follow the operating instructions.
• Following the frothing stage, operate the frothing
function for 1 – 2 seconds to extract excess milk.
• Turn off unit allowing it to cool. Unplug unit
and clean out the steam wand with a needle or
toothpick.
• Ensure there is enough water in the reservoir.
• Chill milk and frothing pitcher prior to making
cappuccino.
• Use a finer grind.
• Use more espresso grounds.
• Manually stop the brew earlier by pressing the
" "
brew button
• Use a finer grind.
12
.
1
5
+