Table of Contents
Advertisement
TerraCAM USB Pro Driver Settings.
The TerraCAM USB Pro supports two different driver models:
1. Windows Driver Model (WDM), which is used for playing back and recording video se-
quences.
2. TWAIN. This interface was originally designed for use with scanners, and is used to record
single frames with your TerraCAM.
You can still work with the TerraCAM USB Pro even if your video application is based on the
older VFW driver model (Video for Windows). Here a so-called wrapper is activated between
the driver and the device, ensuring that your TerraCAM USB Pro also functions in these appli-
cations.
Driver settings.
Capture Filter
Brightness
This is the brightness compensation and is set
automatically. Normally it should not be neces-
sary to adjust this setting.
Contrast
Used to adjust the contrast of the video picture.
Hue
Used to define the hue of the video picture.
Saturation
Used to adjust the color saturation of the picture.
Sharpness
Used to adjust the sharpness of the video picture.
Exposure
Used to set the exposure. This function is automated as a default setting and should not nor-
mally need to be adjusted.
ColorEnable
With this function you can set your TerraCAM to black/white or color mode. If the box is acti-
vated (shown by the check mark) the TerraCAM is in color mode.
6
TerraCAM USB Pro (English)
Advertisement
Table of Contents
Need help?
Do you have a question about the TerraCAM USB pro and is the answer not in the manual?