Technical Data - TerraTec TerraCAM USB pro Manual

Technical Data

1/3" Color sensor
Manual focusing
Focal range from 10 cm to infinity
Resolution up to 640 x 480 pixels (VGA)
Snapshot button for recording single
frames
Up to 30 frames/second (QSIF), 25-30
frames/second (SIF)
Installing the drivers under Windows 98 / 2000
Naturally you'd like to plug in your new TerraCAM and get started right away, but first please
read the following installation information carefully to ensure that everything goes smoothly.
In some cases Windows may ask you to insert the Windows installation CD during the installa-
tion. Please have this CD ready.
1. Insert the provided installation CD into your CD-ROM drive.
2. Connect the TerraCAM USB Pro to a free USB port on your computer.
3. Windows detects the new hardware and tells you to install the drivers.
4. Select your CD-ROM drive as the source for the driver installation.
5. Follow the instructions which will then be displayed.
After the installation the TerraCAM USB Pro is then ready for use in all supported applications.
4
Up to 24-bit color depth
Automatic aperture
Hardware compression (4:1, 6:1, 8:1)
1.5 m cable
12-month guarantee
TerraCAM USB Pro (English)