System Requirements, Usb Cable Support; Apple Computer Internet Urls For Additional Information - Texas Instruments TI-GRAPH LINK 2 Manual Book

System
Requirements,
USB Cable
Support
Apple
Computer
Internet URLs
for Additional
Information
4 TI-GRAPH LINK 2 for Macintosh
The Macintosh used to run TI-GRAPH LINK 2 using the
USB TI GRAPH LINK cable must meet the following
hardware and software requirements.
Any PowerPC-based Macintosh with USB support
running Mac OS 8.1 or better, or Apple USB 1.1 or
better.
Apple "SerialShimLib" extension installed prior to
installing the TI-GRAPH LINK USB driver.
Note: The SerialShimLib is part of the Mac OS 8.6 system
update and is installed ONLY on Macintosh computers
with built-in USB support (i.e., iBook, iMac, Blue & White
G3 and G4 models). It can be added to the extension folder
of systems running Mac OS 8.1 with either built-in USB
(original iMacs), or systems that have installed a third-
party USB card and are using Apple's USB Card Support.
Please note that support for Mac OS 8.1 is limited to the
original iMac computers only.
Apple USB Adapter Card Support 1.4.1 (for OS 8.6 and
better).
http://asu.info.apple.com/swupdates.nsf/artnum/n11543
Apple USB Adapter Card Support 1.2 (for OS 8.5.1).
http://asu.info.apple.com/swupdates.nsf/artnum/n11487
Apple USB DDK 1.2 (contains "SerialShimLib" in
Examples, USBModem) 1.5MB download.
ftp://ftp.apple.com/developer/Development_Kits/Mac_OS_
USB/Mac_OS_USB_DDK_v1.2.sea.hqx
Apple USB DDK 1.4.1 (latest USB release, also
contains "SerialShimLib") 3.8MB download.
ftp://ftp.apple.com/developer/Development_Kits/Mac_OS_
USB/Mac_OS_USB_DDK_v1.4.1.sea.hqx