Reset - Standard Horizon MST70 Owner's Manual

Local/Distant LOC
Press the LOC button to reduce the radio's sensitivity to weaker, distant
signals. 'LOC' is displayed. This is particularly useful when seeking or auto-
storing local stations as it reduces the weaker signals so that only the stronger
local signals are found and stored.
To intentionally receive weak or distant signals, press the LOC button again
to return to Distant mode.
Clock DSP
To display the clock on the LCD, press the DSP (display) button. To return to
the previous mode, press the DSP button again.
To set the clock:
1. Press the DSP button to display the clock.
2. Now press and hold the DPS button while pressing the
the hours or the

RESET

Your MST70's functions are controlled by a microprocessor. If after installation,
you find that some of the functions do not appear to work correctly, you can
reset the microprocessor to restore the radio to its default settings. Note that
after the reset, you will need to reprogram your station memories.
The reset button is located beneath the removable front panel. To reset the
radio:
1. Press the release button to remove the front panel (see 'Detachable Front
Panel' on page 3).
2. Locate the reset switch using the diagram below.
3. Press the switch using a ball point pen or similar.
MST70
button to adjust the minutes.
Owner's Manual
button to adjust
Reset Switch
Page 13