Recording Functions; Long Play Function; Direct Record; Some General Notes For Recording - Philips VR287/07 User Manual

3.

RECORDING FUNCTIONS

1
Insert a cassette into the video recorder or switch the
video recorder on with the
2
Use the P r or P q
the programme number from which you wish to record,
e.g. 'P 01'. In the display appears:
3
Press the
RECORD/OTR n
4
To stop recording, press the

Long play function

You can reduce the recording speed by half. This makes it
possible to record, for example, 8 hours instead of 4 hours on
an 'E240' cassette.
Before recording, with the video recorder switched on, select
the 'LP' (=LongPlay) recording speed by pressing the
button. 'LP' will appear in the display.
Note: During picture scanning, still picture and slow motion
colour playback may be poor.
* You will obtain the best picture quality when recording at
standard speed ('SP').

Some general notes for recording

•
Recording from external sources: Programme numbers
'E1' and 'E2' are provided for recording from external
sources (via the
EXT.1
•
OTR - recording: If you do not want to record to the end of
the cassette, press the
play shows at what time the recording will stop. With each
subsequent press of the
minutes to this time.
You can return to the normal recording status by pressing
the button.
CLEAR (CL)
8
P q button.
button or the buttons to select
0-9
BBC1
button. In the display appears:
0:00
STOP h button.
or scart socket).
EXT.2
RECORD n button again. The dis-
RECORD n button you can add 30
•
Erase protection: So that you don't accidentally delete an
important recording, you can remove the special tab
(erase protection) on the narrow side of the cassette with
a screwdriver or slide the special tab to the left.
Later, if you no longer want the cassette to be erase
protected, you can seal the gap again with adhesive tape
or slide the special tab to the right.
•
Auto-assembling: You can use the auto-assembling func-
tion to join individual recordings without any major picture
disturbance between the recordings. During playback,
search for the correct position on the tape and then press
the STOP h
can start recording as usual by pressing the
button.
During Stop
display for TV-channel identification and tape position,
using the
OK

Direct Record

Do you want to record a television transmission which you are
just viewing?
Press the RECORD n
to standby. The video recorder takes the channel number
which is currently selected on the television and starts
recording. For 'Direct Record' to function, it must be switched
on and the video recorder and the television must be
connected with a scart cable.
SP/LP
1
Press the
AUTOINSTALL
2
Select 'DIRECT RECORD' with the
and confirm with the
3
Select 'ON' with the
button.
OK
After the confirmation the video recorder switches to
standby automatically.
Note:
* Not all external equipment is suitable for using the 'Direct
Record'-function (e.g. some satellite receivers, decoders).
* Don't select another programme number on your televi-
sion set, until 'OK' appears in the display of your video
recorder. This can take up to one minute.
button. 9 will appear in the display. Now you
h or Pause 9 you can switch between the
button.
button with the video recorder switched
button.
P q
button.
OK
P q button and confirm with the
RECORD n
or button
P r