AMD ATI Radeon HD 4600 Series User Manual page 10

4 Installation
4.
Remove any existing graphics cards from the computer.
Warning:
Some graphics cards can get hot while operating. Wait approximately
five minutes after turning off the computer before touching the card.
5.
Locate the appropriate bus slot on the motherboard. If necessary, remove
the corresponding back panel cover.
6.
Align the new graphics card in the bus slot and press firmly until the card
is fully seated.
Figure 1–2 Graphics Card Installation
7.
Fasten the graphics card securely to the back panel.
8.
Make sure the cables are not interfering with anything inside the computer
(for example, a cooling fan) and then replace the computer cover.
9.
Reconnect any cables you have disconnected and plug in the computer
power cord.
ATI Radeon HD 4600 Series © 2008 Advanced Micro Devices, Inc.