AMD ATI Radeon HD 5450 User Manual page 10

4 Installation
5. Locate the appropriate bus slot on the motherboard. If necessary, remove
the corresponding back panel cover.
6. Align the new graphics card in the bus slot and press firmly until the card
is fully seated.
Figure 1–2 Graphics Card Installation
7. Fasten the graphics card securely to the back panel.
8. Make sure the cables are not interfering with anything inside the computer
(for example, a cooling fan) and then replace the computer cover.
9. Reconnect any cables you have disconnected and plug in the computer
power cord.
10. Turn on the monitor and then the computer.
The computer should start normally and the software must be installed next.
ATI Radeon HD 5450 © 2009 Advanced Micro Devices, Inc.