Door Alignment - Haier HTE10WNA User Manual

hte10wna/hte08wna manual
English

Door Alignment

Freezer Door:
1. Remove hinge cover screw.
2. Remove the top hinge cover.
3. Loosen the top hinge screws using a phillips head screwdriver.
4. Adjust the door or put a spacer in between and then tighten the screws.
5. Replace the top hinge cover.
Hinge box
cover
Refrigerator Door:
1. Loosen and remove the bottom hinge using a
phillips head screwdriver.
2. Adjust the door, or put a spacer in between and
then tighten the screws.
7
10/22/01 11:49 AM
(see fig. # 1)
Top hinge
(see fig. # 2)
bottom hinge pad
lower bracket
lower pivot pin
lower pivot pin hole
Page 8
fig. # 1
fig. # 2