LG RH-2320 Service Manual page 89

3) Recording format using phase-change recording material
(DVD-RW / DVD+RW)
Data is recorded by changing the recording layer from the amorphous status to the crystalline status,
and played back by reading the difference of the reflection coefficient.
Amorphous: Non-crystalline.
• Disc structure
• Recording principles
[ Recording ]
When a high-power laser is applied to the recording material, it melts and then becomes amorphous with
a low reflection coefficient when it quickly cools off. When a mid-power laser is applied to heat gradually
the recording material and then gradually cools it off, it becomes crystal with a high reflection coefficient.
[ Playback ]
A low-power laser is used for playback. The amount of reflected light depends on the status (amorphous
or crystalline) of the recording material. This is detected by an optical sensor.
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
4-19 LGE Internal Use Only