Main - LinPlug SaxLab User Manual

Main

SaxLab 2's Main section is located in the middle of the instrument's Front
Panel. It contains controls for selecting the current Sound Set as well as for
setting the relative levels of the instrument's three sound layers. It also
contains a MIDI indicator that shows when incoming MIDI Note-on messages
are received.
Sound Set: SaxLab 2's Sound Set control is used for selecting the current
Sound Set. Each Sound Set is a collection of samples that the instrument
uses to generate sound. Each Sound Set is made up of three layers: the Main
layer, the Air layer and the Keys layer. These three layers are mixed to
produce the instrument's overall sound. The Sound Set should not be
confused with a Preset. The former is a collection of samples used by the
instrument, while the latter is a "snapshot" of all the instrument's current
settings, and an associated Sound Set. As such, many Presets can utilize the
same Sound Set.
Keys: The Keys control sets the volume of the Keys sample layer. This layer
contains the characteristic key "clicks" usually heard in saxophones and
clarinets. Increasing the value of the Keys control makes the Keys layer
louder with respect to the instrument's other two layers.
VOL (Volume): The VOL (Volume) control sets the volume of the pitched
sample layer. This layer contains the pitched component of the sound.
LinPlug SaxLab User Guide 2.0.3
10