Features - LinPlug Albino 3 Manual

Features

The Albino 3 contains a range of features designed to make your music-
making more efficient and enjoyable. These features are described below:
Sound Presets consist of 4 separate Layers for rich, complex sound
synthesis.
4 oscillators per Layer, 4 types. Oscillator modules include Analog-
type, Digital-type, Noise-type and Audio Input-type. FM modulation and
AM modulation. Oscillator Sync in Analog Oscillator 2 and 4. Various
filter routing options.
Stereo Filters, 4 types. Filter modules include Silk-type, Cream-type,
Scream-type and Comb-type. 3 multimode filters (Silk, Cream and
Scream), each with a different basic design thus producing different
sounding filters. Filters are stereo with panning and panning
modulation options.
Saturation knob precedes each filter to add overdrive to the sound
before it enters the filter. Four types of Saturation are available.
8 envelopes, 2 types. ADSFR type and 5-stage envelope type with loop
function. Each envelope stage has separate slope/curve settings. Each
oscillator has its own volume envelope.
4 LFOs with various waveforms and midi-syncable. LFO Waves have
adjustable start-phase and waveform-symmetry. LFOs can also be set
to mono mode.
Modulation Matrix which includes 16 routings with 26 sources and 47
destinations. Separate control section for Velocity to: AMP, Filter 1 and
Filter 2.
Arpeggiator with 32 step rhythm sequencer, step length, clock settings,
various modes including modulation and chord, switchable keyboard
retrigger, swing, velocity mix, save/load functionality
Spread function for each Oscillator for ultra fat detuned sounds
Chord memory mode (saved with the preset)
Rob Papen Albino 3.0 8