Controls - LinPlug Albino 3 Manual

Controls

Users have the option of controlling all Albino 3 dials in either a circular or a
linear manner depending on the Dial Mode setting on the Albino 3's rear
panel (see the "Main" section of this manual for more information about the
Albino's rear panel).
Holding down the ALT key while clicking on a control changes the selected
control's value a minimum step upwards (when clicking in the upper half of
the control) or a minimum step downwards (when clicking in the lower half
of the control).
Holding down the CTRL key while clicking on a control sets the control to
its default value (e.g. for Volume controls it sets the control's value to -6
dB).
Holding down the SHIFT key while changing a control's value enables finer
control values to be set.
Double clicking once in a Modulation Matrix slot sets the value of the slot to
0.00. Double clicking in the same slot a second time resets the slot to its
previous value.
All Controls can be controlled using external MIDI messages. To do this
you need to use the Albino 3's ECS which is described in detail later in this
manual.
Rob Papen Albino 3.0 12