Modulation Destinations - LinPlug Albino 3 Manual

LFO 2
LFO 3
LFO 4
Osc 1,2,3,4 Envelope
Mod-Envelope
Fil-1, Fil-2 and Amp Envelope
Arpeggiator

Modulation Destinations

Osc 1,2,3,4 Amplitude The amplitude of Oscillator 1 to 4, used for
Osc 1,2,3,4 Pitch
Osc 1,2,3,4 Symmetry Pulsewidth
Rob Papen Albino 3.0
LFO 2 (bipolar).
LFO 3 (bipolar).
LFO 4 (bipolar).
The envelope of Oscillator 1,2,3 or 4. Oscillator
envelopes control
however if the oscillator is not used, or it makes
sense within the preset to do so, the envelope can
be used as a modulation source (unipolar).
The Mod-Envelope is user-definable and can be
routed to any available modulation destination
(unipolar).
The envelope of the Filters and Main
Amplitude. This envelopes control the respective
Filter / Volume, however if it makes sense within
the preset to do so, the envelope can be used as a
modulation source (unipolar).
As a special modulation source the Arpeggiator is
useable as modulation source too. (unipolar)
tremolo.
N.B. In order to create the classic tremolo effect it
is better to use Main Amplitude as the modulation
destination as this is applied to the whole voice.
The pitch of the respective Oscillator, used for
vibrato.
N.B. In order to create the classic vibrato effect it is
better to use Main Pitch as the modulation
destination as this is applied to the whole voice.
or
Oscillator waveform, used to thicken a sound or
the respective
Symmetry of
oscillator,
the respective
75