Table of Contents
Advertisement
Channel menu
This TV set has three methods to set channels, which are respectively Auto Scan, manual Scan
In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV
set to set channel.
A password is required to gain access to Channel menu if the Lock of Edit program menu is turned on.
Automatic Scan
- Automatically finds all channels available through antenna or cable inputs, and
stores them in memory on the All Channel List.
Note : Channel menu only available after selecting
TV in the input menu.
1
Press the MENU button and then use
Channel menu.
2
Press the
button and then use
3
Press the
button and then use
mode.
Air
4 Press the
button
OK
5
When you are satisfied with your choice, press MENU button to
return to the previous menu.
6
Press the
/
button to select Auto Scan.
7
Press the
button and press the
8
To cancel searching, press the OK button.
When
Air
is selected, the TV will detect antenna signals and will
search for antenna TV (NTSC and ATSC) channels available in
your local area.
When
Cable
is selected, the TV will detect cable company supplied
signals and will search for cable TV (NTSC,ATSC, QAM modulated)
channels available in your area.
18 TV LCD-TFT
Air TV or Cable
/
button to select the
/
button to select Tuner.
/
button to Select
Cable
button to start searching.
OK
Video
Tuner
Auto Scan
Audio
Manual Scan
Time
Fine Tune
A
Channel
B
Edit Program
C
Rename
Function
or
Lock
: Move cursor,
/OK: Go to submenu, EXIT/ MENU: Exit main menu
Tuner
Video
Auto Scan
Audio
Manual Scan
Time
Fine Tune
Edit Program
A
Channel
B
C
Rename
Function
Lock
: Move cursor, OK: Enter, MENU: Return to upper menu,
EXIT: Exit main menu
Operation
fine tune.
Air
Air
Cable
Air
OK
Cancel
Air Tuner Number: 47
Found:
1
Advertisement
Table of Contents
