Operation; Switching On/Off The Tv Set; Choose The Menu Language; Choose The Input Source - Haier HL26S-A Owner's Manual

Operation

In the manual, the OSD (on screen display) may be different from your TV`s, because it is just an example to help
you with the TV operation.
There are several options you might need to set up in order for your TV to work properly. Read the instructions that
follow.

Switching On/Off the TV set

1. First, connect power cord correctly.
2. Select the viewing source by using INPUT button on the remote control.
3. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
4. If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
Note
If the TV in power on , the screen show information according the type of input signal . the information will disappear.
If there is no signal , No Signal

Choose the Menu Language

When you start using your set for the first time, you must select the language which will be used for displaying menus
and indications.
Channel
Menu Language
DTV Caption Style
Video
OSD Timeout
OSD Transparency
Audio
DNR
Time
Function
Lock

Choose the Input source

Change the picture source so you can watch your TV, cable TV, VCR, DVD, or any
other devices that are connected to your TV.
1. Press the INPUT button to enter the Select Main picture Source menu
and then use the /
Video3, S-Video,Component1, Component2, PC, HDMI/DVI1, HDMI/DVI2 .
2. Press the OK button to confirm .
18 TV LCD-TFT
will display on the screen.
English
Middle
Middle
Off
Move /OK: Select /EXIT/ MENU: Exit
button to select the desired items
1 Choose the TV Input and then Press the MENU button.
2 Press the / button to select the Function menu.
3 Press the or OK button and then select the Menu
Language.
4 Press the or OK button to select language.
English Spanish or French
5 When you are satisfied with your choice, press the EXIT button
to return to normal viewing or press the MENU button to return to
the previous menu.
TV, V ideo1 , V
Select Source
ideo2 ,
Move /OK: Select
Operation
TV
Video1
Video2
Video3
S-Video
Component1
Component2
PC
HDMI/DVI1
HDMI/DVI2
/EXIT/ MENU: Exit