Table of Contents
Advertisement
BIOS Configuration
4.13. SUPERVISOR / USER PASSWORD
When you select this function, the following message will appear at the center
of the screen to assist you in creating a password.
Figure 4.10: Password Setting
Type the password, up to eight characters, and press <Enter>. The password
typed now will clear previously entered password from CMOS memory.
You will be asked to confirm the password. Type the password again and press
<Enter>. You may also press <Esc> to abort the selection and not enter a
password.
To disable password, just press <Enter> when you are prompted to enter
password. A message will confirm the password being disabled.
Once the password is disabled, the system will boot and you can enter Setup
freely.
PASSWORD DISABLED
If you select "System" at "Security Option" of BIOS Features Setup Menu, you
will be prompted for the password every time the system is rebooted or any time
you try to enter Setup.
If you select "Setup" at "Security Option" of BIOS Features Setup Menu, you will
be prompted only when you try to enter Setup.
4-26
Advertisement
Table of Contents
