Integrated Peripherals - Gigabyte GA-78LMT-S2 User Manual

Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express
graphics card, or the onboard graphics.
PCI Slot Sets the PCI graphics card as the first display. (Default)
OnChipVGA Sets the onboard graphics as the first display.
PEG Sets the PCI Express graphics card on the PCIEX16 slot as the first display.
2-6

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
OnChip SATA Controller
OnChip SATA Type
x OnChip SATA Port4/5 Type
x OnChip SATA Port as ESP
Onboard LAN Function
Onboard LAN Boot ROM
 SMART LAN
Onboard Audio Function
USB Controllers
USB Legacy Function
USB Storage Function
Onboard Serial Port
: Move Enter: Select
F5: Previous Values
OnChip SATA Controller
Enables or disables the integrated SATA controller. (Default: Enabled)
OnChip SATA Type (SATA2 0~SATA2 3 connectors)
Configures the operating mode of the integrated SATA2 0~SATA2 3 controller.
Native IDE Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that support Native
mode.
RAID Enables RAID for the SATA controller.
AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
( AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
OnChip SATA Port4/5 Type (SATA2 4/SATA2 5 connectors)
This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the
operating mode of the integrated SATA2 4/SATA2 5 connectors.
IDE D isables RAID for the SATA controller and configures the SATA controller to PATA
mode. (Default)
As SATA Type The mode depends on the OnChip SATA Type settings.
Integrated Peripherals
[Enabled]
[Native IDE]
IDE
Press Enter
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[3F8/IRQ4]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 29 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults