Epson STYLUS COLOR 580 Setup Manual page 8

Note:
It is possible to install the Reference Guide on your hard drive from the
printer software CD-ROM. To install the guide, click Install Reference
Guide and follow the on-screen instructions. When the installation is
complete, a View Reference Guide icon appears in the EPSON folder.
Double-click the icon to open the guide.
It is possible to access Technical Support from the printer software CD-
ROM. Insert the CD in the CD-ROM drive and double-click the
Technical Support Web Site icon in the EPSON window.
3. At the initial screen, click Continue. The Installer dialog box appears.
4. To install the printer software that is included on your printer software
CD-ROM, make sure that the Install Location box displays the correct
drive, then click Install.
5. When a message appears informing you that the installation is
complete, click Restart to restart your computer.
Selecting your printer in the Chooser and accessing the Setup utility
After you have installed the printer software on your Macintosh, you need
to open the Chooser and select your printer. You must select a printer the
first time you use it or whenever you want to switch to another printer. Your
Macintosh will always print using the last printer selected. After selecting
your printer, you must access the Setup utility, which will guide you
through the setup process. Follow the steps below to select your printer in
the Chooser and then to access the Setup utility.