Epson STYLUS COLOR 580 Setup Manual page 6

Select Install Printer Driver/Utility, and click
4.
dialog box that appears to start the printer software installation. After
the printer software installation is complete, the Problem Solver is
automatically installed on your hard drive.
Note:
It is possible to install the Reference Guide on your hard drive from the
Installer dialog box, as shown above. To install the guide, click Online
Guide and then
the on-screen instructions. When the installation is complete, an ESC580
Guide icon appears in the EPSON folder. Double-click the icon to open
the guide.
The Problem Solver provides tips and instructions to help you solve most
problems that you may encounter when printing. The Problem Solver can
be accessed through the Epson folder, Status Monitor 3, or the printer
driver. For details, see the "Troubleshooting" section of your Daily Use
guide.
5. Follow the on-screen instructions to plug the power cord into a properly
grounded electrical outlet. Before plugging in the cord, check the label
on the back of the printer to make sure the voltage required by the
printer matches that of the electrical outlet you will plugging it into.
Also, make sure that you have the correct power cable for your power
source.
?
Caution:
It is not possible to change the printer's voltage. If the rated voltage and
your outlet voltage do not match, contact your dealer for assistance. Do
not plug in the power cord.
. Then, click Install Reference Guide and follow
. Then click OK in the