Technical Specifications; Installation; Positioning - Electrolux ER 1532 T Instruction Booklet

Table of Contents

Advertisement

TECHNICAL SPECIFICATIONS

DIMENSIONS
POWER SUPPLY VOLTAGE AND FREQUENCY
TOTAL POWER ABSORBED
AVERAGE DAILY UNITS ELECTRICITY(*)
GROSS CAPACITY
NET CAPACITY
STAR RATING
(*)This figure is based on standard test results in accordance with European Standard EN153. Actual
consumption will depend on how the appliance is used and where it is located).

INSTALLATION

Positioning

For this appliance to work efficiently, it must not be
located where the temperatures will fall below 16°C
(61°F) or rise above 32°C (90°F), e.g. conservatories.
For correct operation this appliance must be located in
a dry atmosphere, away from heat sources, e.g.
cookers, radiators, boilers and direct sunlight.
You should also ensure that air can circulate freely
around the back and the top of the cabinet. There
should be 100mm (4") between the top of the cabinet
and any overhanging kitchen furniture. Alternatively
allow 50mm (2") between the top of the cabinet and
any overhanging kitchen furniture and a gap of 25mm
(1") on either side of the appliance.
Do not obstruct the space underneath. The back of the
cabinet may be placed close to the wall but must not
touch it. DO NOT install in places with restricted
ventilation.
Adjust the level of the appliance by screwing out the
adjustable foot, or feet, at the bottom of the cabinet
using your fingers.
Fridge
Storage compartment
A
NP006
D200
14
Height
85
Width
54,5
Depth
60
220-240 V / 50 Hz
110 W
0,70 kWh
160 l
118 l
13 l
B
cm
cm
cm

Advertisement

Table of Contents
loading

Table of Contents