Changing The Tv's Input - Daewoo DTQ 21D7SSP Instruction Manual

Changing the TV's Input

Normally, your TV displays the signal coming through the antenna terminal. However, If you've
connected another component to your TV(such as a VCR) using the Video/Audio input, you will
want to be able to view the signal from the component.
To do this, you will need to switch from the ' TV ' input to the 'Line1, Line2' Input, as follows.
1 With the TV on, press the MENU button twice, then " Set-Up " menu will appear.
2 Use the WCHV buttons to select " Input ".
3 Press the CVOLB buttons to change from ' TV ' to 'Line1, Line2'.
4 Wait 10 seconds, or press the MENU button to return to normal TV viewing.
3-2
Set-Up
Language :
Input :
Select
12 Chapter 3: Operating Your TV
English
Line2
Adjust Next
2
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input : TV
Select Adjust Next
3-1
Set-Up
Language : English
Input : Line1
Select Adjust Next