Advertisement
CHANGING THE REVERSIBLE DOOR
Only : FR-146(SL)
This refrigerator has been built with the door hinges on the right.
If you wish to change the opening direction, follow the instruction below:
• Unplug the refrigerator from its electrical outlet.
• Empty everything in the refrigerator, including shelves, food, etc.
1. Remove the hinge cover on the right top of the
cabinet.
2. Remove the two screws (using a ratchet tool with a
8MM socket) that hold the top hinge to the cabinet.
Keep these screws for later use.
3. Lift the top hinge straight up to free the pin from the
socket on the top of the door.
4. Lift the door and place it on a padded surface to
prevent scratching it.
5. Remove the plug buttons from the upper left holes
as illustrated and transfer them to the uncovered
holes at the right side. Be sure to press the plug
buttons firmly into the holes.
6. Lay the cabinet on its side down on the floor.
Remove the two screws that hold the bottom hinge
to the cabinet using a 10MM socket. Keep these
screws and washer for later use.
9
Hinge cover
Top hinge
Plug button
Bottom hinge
7. Insert the bottom hinge at the left side using the two
screws previously removed in step 6.
NOTE: Do not tighten screws.
8. Stand the cabinet.
9. Replace the door making sure the bottom socket
enters the bottom hinge pin.
Be sure washer is in place.
10. While holding the door in the closed position,
secure the top hinge at the left side using the two
screws previously removed at the beginning in
step 2.
Do not tighten the screws until the top of the door
is leveled with the top cabinet.
11. Replace the hinge cover.
12. Tools required:
-8MM & 10MM socket-ratchet.
-Putty knife or thin-blade screwdriver.
10
Advertisement
