Auto Start - Magic Chef MCD790W Operation Instructions And Cooking Manual

MCD790W(¿ )-631Q2A 02.2.15 6:39 PM ˘ ` 12
WEIGHT DEFROSTING AND COOKING IN TWO STAGES
POWER POWER
When you touch START pad, the WEIGHT DEFROST, STAGE1 and STAGE2 indicators come on to
confirm the power levels selected. The WEIGHT DEFROST indicator starts blinking to show you that
the oven is in WEIGHT DEFROST mode. The display counts down the time remaining in WEIGHT
DEFROST mode.
When the oven beeps, turn over, break apart and or redistribute the food. At the end of WEIGHT
DEFROST mode, the oven will beep and start stage one. The WEIGHT DEFROST indicator goes off
and the STAGE1 indicator starts blinking. The display counts down the time remaining in stage one.
At the end of stage one, the oven will beep and start stage two.
The STAGE1 indicator goes off and the STAGE2 indicator starts blinking. The display counts down
the time remaining in stage two. When stage two ends, you will hear 3 beeps.

AUTO START

Auto start can be programmed for up to two cooking stages.
Auto start can not be programmed for auto defrost.
CLOCK/
A.START
When you touch START pad, the present time appears in the display and the cooking program
indicators come on. The AUTO START indicator and the colon start blinking. When the selected start
time arrive, the oven begins operating and the oven light turns on. The AUTO START indicator goes
off and the next stage indicator begins to blink. When the cooking is completed you will hear 3 beeps.
The oven turns off and the present time appears in the display.
NOTE : AUTO START can be used for time cooking, if the clock is set. If the oven door is opened
after programming AUTO START, it is necessary to touch the START pad for the time of
day to appear in the readout so that the oven will automatically begin programmed cooking
at the chosen AUTO START time.
Before setting, check to make sure the clock is showing the correct time of day.
6. Touch POWER pad.
7. Touch number pad for desired
power level in the second stage.
8. Touch number pads for cooking
time in the second stage.
9. Touch START pad.
1. Program the desired power
level and cooking time for food
to be cooked.
2. Touch CLOCK/A.START pad.
3. Enter the desired start time by
pressing the number pad.
4. Touch START pad.
The STAGE2 indicator lights and "p-" is
displayed.
The display will show what you touched.
The display will show what you touched.
The AUTO START indicator lights and
" : 0 " is displayed.
The display will show what you touched.
12
(CONTINUED)