Timer Recording Using Videoplus+(Showview):Option - Daewoo GB14H1T Instruction Manual

R E C O R D I N G
c a s s e t t e s
12
For timer recordings, clock, date, and stations must be set correctly (page 5).
Load a cassette with its safety tab in place (see page 13) and with sufficient free
space for the recording.
Timer recording using VideoPlus+ (ShowView): (Option)
No. Pr. Date Start
1
2
3
4
5
6
(Do not use the main power button on the front panel
of the set.) The televideo will switch on and off
automatically to record the timer event.
If you have not set the clock, when you press the VideoPlus+(Showview)
button to set timer recording, the set will automatically change to the "CLOCK"
menu.
If you don't have the VideoPlus+(Showview) numbers see page 11 for the
normal timer.
If you have made a mistake, move back to the relevant position with the C
button and change the setting.
During recording you can switch the screen off by pressing
The screen will indicate if the station is not programmed (page 5~7).
Should programmings overlap, you get a warning.
In the case of error messages, correct the input or check the date and time on
your televideo (also check your TV guide).
Showview
---------
0 1 / 0 1 / 2 0 0 1 1 3 : 5 7
0 - 9 : Digit entry
: Store
CLEAR : Delete
SV/V+ : Exit
Timer programme
End PDC SP/LP
01 05 14:18 17:15 Off SP
--- --- --:-- --:-- Off SP
--- --- --:-- --:--- Off SP
--- --- --:-- --:--- Off SP
--- --- --:-- --:--- Off SP
--- --- --:-- --:--- Off SP
VW : Select CLEAR: Delete
CB : Access : Store
MENU : Previous
Call the VideoPlus+
(ShowView) menu.
From your TV magazine, type
in the number next to the
programme you want to
record. (Digit key)
Confirm ( button)
Showview :
FRANCE/CONTINENTAL
VideoPlus+ : U.K. Only
If you press the button,
Timer Programme menu will
be displayed.
If you want to change data,
Press buttons.
VW
Confirm ( button)
button.