When Recording Time Overlaps - Daewoo GB14H1T Instruction Manual

R E C O R D I N G
c a s s e t t e s
10
Your televideo is switched on by the main power switch on the front panel and by
the button.
Simple recording - REC
L STOP
00:12:34
M REC SP
00:12:34
PAUSE
00:12:34
L STOP
00:12:34
One touch recording - OTR
M OTR SP
00:12:34
0:30
OTR preparation
Before setting OTR, Make sure that.....
The cassette tape has the safety tab.
The tape is long enough to record the programme.
During recording you can switch the screen off by pressing
Meanwhile the recording continues.
Yor can release the OTR mode by pressing "stop" during REC mode.
If the display shows "AV" instead of "PR" press
If you program events without setting the time, it will automatically return to
"Clock" mode. If you program events that overlap, at least one of your events
will not record correctly.

When recording time overlaps

When setting the programmable timer, be careful not to overlap the
preset times. If you happen to overlap the preset programs, the End
time has priority and the overlapped programmes cannot be recorded.
Choose the station whose
Pr 01 ARTE
Clock 12:34
programme you want to record.
Pr 01 ARTE
Clock 12:34
Start your recording.
If you wish to interrupt recording
Pr 01 ARTE
briefly -then continue.
Clock 12:34
Stop your recording.
Pr 01 ARTE
Clock 12:34
Choose the station you want and
press "REC/OTR" repeatedly until
Pr 01 ARTE
Clock 12:34
desired period is displayed.
button.
button.