Timer Recording, Timer Review - Erasing Or Changing, Auto Tracking - Daewoo 14H1N, 20H1N 14H1T, 20H1T 14H2N, 20H2N 14H2T, 20H2T Instruction Manual

For timer recording, clock, date, and stations
must be set correctly.
Load a cassette with its safety tab in place and
with sufficient free space for the recording.
To enter station numbers using the cursors VW .
Timer recording
No. Pr.
1
2
3
4
5
6
VW : Change
CB : Select
You can switch your televideo off during recording.(Don't use the main power button
(ON/OFF) on the front panel of the set.)
The televideo will switch on and off automatically to record the timer event.
If you have made a mistake, move to the position you want to change using the VW
CB button and change the setting.
The recorder will eject cassettes which have the safety tab removed.
Timer review - erasing or changing
Call the televideo's "Main menu", choose "Timer programming".
Select the programming to erase or change If you want to erase this programming press button CLEAR.
If you wish to make changes :
Move to the position you want to change using the VW CB buttons.
Change the setting using the VW buttons.
Auto tracking
If you press the 0/ATK key in Playback mode, the televideo will operate the auto tracking function again.
If you wish to record from a satellite receiver select under "Pr" the satellite programme
location or AV (depending on the connection with the antenna cable or a SCART cable.)
NB : Leave the satellite tuner switched on and to the programme you want to record.
Call the televideo's "Main menu", choose"Timer
programming".
Timer programming
Date Start End SP/LP
01 02 09:25 03:12 SP
--- --- --:-- --:-- SP
--- --- --:-- --:-- SP Select a free timer memory.
--- --- --:-- --:-- SP
--- --- --:-- --:-- SP
--- --- --:-- --:-- SP
CLEAR : Delete Set ......
MENU : Return
: Store
- the date (date, daily = osd is displayed "day", sun~ sat)
- start and end time.
- the recording speed.
R e c o r d i n g
C A S S E T T E S
E
11