Filter - AEG FM2500DD-A User Manual

Filter

After 30 hours of operation the filter must be cleaned, 0 appears.
Important: Fingers can get caught. Only remove filter or upper casing when ap
pliance is dismantled.
1. Switch on down draught extractor and move to the top position.
2. Switch off fan level.
3. Remove upper casing and place on something soft.
4. Press in and remove the springs of the filter.
5. Take filter out.
6. Clean filter with hot water and washing up liquid or clean in the dishwasher.
If cleaned in the dishwasher, the filter can become discoloured, but this does not
affect the functioning of the filter.
7. Install filter, springs and upper casing in reverse order.
The filter must be completely dry before being installed.
8. Reset filter sensor by pressing
9. 0 goes out.
If the filter is cleaned before the 30 hours of operation have elapsed, it can be
reset in the same way.
If the electricity supply is interrupted, the filter sensor automatically resets itself.
Removable Frontline strip
The aluminium Frontline strip fastens on by means of magnets. It is easy to re
move by hand and can be cleaned with detergent. Please do not use any scour
ing agents or sponges that scratch. Do not clean the strip in the dishwasher.
and at the same time for 3 seconds.
Cleaning and Care
13