Temperature Display; Prior To Initial Start-Up; Starting Up - Setting The Temperature - AEG Santo K81200i Operating Instructions Manual

Temperature display

• During normal operation, the temperature currently present in the
fridge (ACTUAL temperature) is displayed.
• When the temperature is being adjusted a flashing display indicates
the fridge temperature currently set (DESIRED temperature).
Prior to Initial Start–Up
1. Please clean the appliance interior and all accessories prior to initial
0
start-up (see section: "Cleaning and Maintenance").

Starting Up - Setting the Temperature

0 1. Plug the mains plug into the mains socket.
2. Press ON/OFF button.
The green mains pilot indicator illuminates.
3. Press either the „+" (WARMER) or „-" (COLDER) button.
The temperature display switches over and the DESIRED temperature
currently set flashes on the temperature display.
4. Set the required temperature by pressing the „+" and „-" buttons (see
section "Temperature setting buttons"). The temperature display will
immediately show the changed setting.
Each time the button is pressed the temperature is adjusted by 1 °C.
From a food safety point of view +5 °C should be considered suffi-
3
ciently cold for storing food in the fridge.
5. Once the required temperature has been set, after a short period
(approx. 5 sec.) the temperature display will change and again indicate
the current ACTUAL temperature inside the fridge. The display will
change from flashing to continuous illumination.
The compressor will start and then run automatically.
Information! When the setting is changed, the compressor does not
start immediately if automatic defrosting is currently taking place.
As the storage temperature within the fridge is reached quickly you can
3
store food immediately after switching on.
The temperature display can indicate several pieces of
information.
39