Starting A Programme; Interrupting A Programme/Adding Washing - AEG LAVAMAT 50800 User Information

Starting a programme

1. Check that the tap is turned on.
2. Press the START/PAUSE button. The programme is started or will start
after the delay timer has counted down.
During the wash programme the current stage of the programme will
be shown in the programme progress display.
3
If after pressing the START/PAUSE button the END indicator flashes 4x,
the door has not been correctly shut. Push the door firmly closed and
press the START/PAUSE button again.

Interrupting a programme/adding washing

Interrupting a programme
• A washing programme can be interrupted at any time by pressing the
START/PAUSE button and then re-started by pressing the START/
PAUSE button again.
• To cancel a programme before it has ended, turn the programme se-
lector to OFF. Important! Be careful of water in the appliance.
Adding washing
Washing can be added as long as the DOOR indicator is not illuminated.
1. Press the START/PAUSE button. The door can be opened.
2. Close the door and press the START/PAUSE button again. The pro-
gramme will continue.
15