AEG FAVORIT 88070 i User Manual page 24

24
In daily use
If you want to use 3 in 1 products
1. Press the ON/OFF button.
2. Go to the 3 IN 1 option.
3. Set the value to ON (see section "Adjusting an option/setting"
up in the symbol line.
Before the start of the dishwashing cycle put 3 in 1 detergent in the detergent
dispenser.
As the rinse aid inflow is automatically switched off when the 3 in 1 function is
activated, it may come about because of the different quality standards in the 3
in 1 detergent, that the dishes do not dry sufficiently.
If this happens, proceed as follows (see section "Adding rinse aid"):
• Fill up the dispenser (if this is empty) with rinse aid.
• Set rinse aid dosage to "2" mechanically.
• Activate rinse aid inflow.
If you do not want to use 3 in 1 products any more
If you want to stop using 3 in 1 products, please do the following:
• Deactivate the 3 in 1 function.
• Fill up the dispensers for salt and rinse aid again.
• Switch the water softener to the highest setting and perform up to three nor
mal cycles without loading any dishes.
• Then set the water softener to the water hardness in your area.
If you want to use 4 in 1 products
When using "4 in 1" detergents that integrate also anti glass corrosion agent
into "3 in 1" formula, please follow the same indication as given for "3 in 1" de
tergents.
symbol lights