Changing The Light Bulb; Service & Spare Parts - AEG OKO-Santo 1450-6 TK Operating Instructions Manual

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light
bulb, switch off the appliance and unplug it, or pull the fuse or the
circuit breaker.
Light bulb data: 220-240 V, max. 15 W
To switch off the appliance, turn the temperature regulator to position
"0".
Unplug the mains plug.
To change the light bulb, undo the
screw.
Press the light bulb cover as shown
and slide it backwards.
Change the defective light bulb.
Refit the light bulb cover and the
screw.
Put the refrigerator back into operati-
on.
Service & Spare Parts
In the event of your appliance requiring service, or if you wish to pur-
chase spare parts, contact your local AEG Service Force Centre by tele-
phoning:
Your call will be automatically routed to the Service Centre covering
your post code area.
In guarantee customers should ensure that the above checks have
been made as the engineer will make a charge if the fault is not a
mechanical or electrical breakdown.
Please not that proof of purchase is required for in-guarantee service
calls.
22
AEG65
08705 929 929