Native Instruments Reaktor Spark Manual page 32

velocity values. The dynamic range for the highest parabolic key velocity influence with the
V l V equal to 2 is 86 dB. V
el to eVel alue
ful for sounds saturated by the Cabinet saturator effect by compensating the compression
effect of saturation.
The sensitivity of the attack time to the key velocity can also be set. For longer attack times
when playing with high velocity give the V
give the the V a
el to ttacK
tack times when played louder.
Just as the peak and sustain levels of the envelope can be made sensitive to the key veloc-
ity, they can also be made to depend on the note that is being played. Set the l
F to positive values for higher levels at higher notes. When set to +1.0, the amplification
aDer
is 12 dB per octave. For negative values of the l
When set to -1.0, the attenuation of higher notes is 12 dB per octave. The level of the note
C3 stays the same as the scaling intervals are counted from that note.
The attack, decay, and release times can be scaled to the notes that are being played. Set the
t S F to positive values for longer times for higher notes. A setting of +0.5 causes
iMe cale aDer
the times to be doubled, a setting of +1.0 causes the times to be quadrupled for each octave
higher than the note C3. For negative values of the t
for higher values. A setting of +0.5 causes the times to be halved, a setting of +1.0 causes
the times to be multiplied by one-fourth for each octave higher than the note C3.
l
el to eVel
a
el to ttacK
V a negative value. Most acoustic instruments have shorter at-
alue
settings higher than 1 are especially use-
V a positive, for shorter attack times
alue
S lower notes receive higher levels.
eVel cale
S F the times become shorter
iMe cale aDer
S
eVel cale
REAKTOR SPARK – 32