4.8 Mod Delay Section
With the modulation delay you can add echo or chorus effects to the instrument.
The Mod Delay effect is a tempo synchronizable stereo delay with LFO, cross-feedback, high-
pass and lowpass filters.
The t
K
sets the delay time in milliseconds. This is the mean delay time since there
iMe
nob
can be a delay time offset between the left and right channel. This offset is controlled by the
D
lr o
K
elay
FFSet
nob
channel.
When D
F
elay
eeDbacK
o
K
changes the distribution of the sound in the stereo field. In order to synchronize
FFSet
nob
the Delay Time to the tempo specified by the host or by REAKTOR , the D
can be activated. When D
as a multiple of the BPM tempo. The strength and longevity of the echoes are controlled with
the D
Fb K
. It sets the amount of feedback from the delay output to its input. Turning
elay
nob
on the i
b
nVert
utton
to the sound of the mixed signal if the feedback signal is inverted. The i
amount of input signal entering the Mod Delay effect. If an echo is sounding at the output of
the delay, turning the i
The x a
c
Mt
ontroller
the right delay output to the left delay input and vice versa. Use this to diffuse the sound
in the stereo field, for a reverb-like effect with short D
fect has a stereo LFO as its delay time modulation source. Chorus effects can be achieved
when the D
K
epth
nob
applied to the delay time. The rate of the LFO is determined by the setting of the r
. It sets the ratio between the delay times of the left and of the right
is nonzero and the Delay t
S
is on, the value display will display the rate of the echoes
elay
ync
inverts the feedback signal. At short delays it makes a big difference
K
down will not turn down the echo, but let it naturally fade out.
n
nob
determines the amount of the feedback that is routed crosswise from
value is not too large. D
value is small, changing the D
iMe
t
settings. The Mod Delay ef-
elay
iMe
controls the amount of LFO modulation
epth
lr
elay
S
b
elay
ync
utton
K
controls the
n
nob
K
.
ate
nob
REAKTOR SPARK – 29
Need help?
Do you have a question about the Reaktor Spark and is the answer not in the manual?
Questions and answers