Maintenance And Cleaning; Internal Cleaning; External Cleaning; Replacing The Light Bulb - AEG Santo Operating Instructions Manual

Maintenance and Cleaning

Before any maintenance or cleaning work is carried out DISCONNECT
the appliance from the ELECTRICITY supply.

Internal Cleaning

0 Clean the inside and accessories with warm water and bicarbonate of
soda (5 ml to 0.5 litre of water). Rinse and dry thoroughly.
Warning!
1
• Do not use detergents, abrasive powders, highly perfumed cleaning
products, wax polishes or cleaning products containing bleach or
alcohol.
0 Clean the drain hole of the water through at regular intervals and
ensure that the drain hole is clear at all times. If blocked, carefully
clear using a piece of flexible curtain wire inserted into the drain outlet
to remove the blockage.
0 Regularly check the door seals and wipe clean to ensure they are clean
and free from debris.

External Cleaning

0 Wash the outer cabinet with warm soapy water.
Warning!
1
• Do not use abrasive products
• There are sharp edges on the underside of the product so care should
be taken when cleaning.

Replacing the light bulb

Warning! Ensure the appliance is disconnected from the mains supply.
1
Light bulb specifications: 220-240 V, max. 15 W, socket: E 14
0 To switch the appliance off turn
the temperature regulator to
position "0" .
0 Unplug the mains plug.
0 To change the light bulb, remove
the screw and the light bulb cover
as shown.
0 Change the defective light bulb.
0 Refit the light bulb cover and the screw.
17