NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Configuring the ProSafe SSL VPN Concentrator 25
After the ProSafe SSL VPN Concentrator 25 software has been installed and the Static IP address
configured, you may log into the SSL VPN Concentrator web management interface from an IE
6.5.1 or higher, Safari 1.2 or Mozilla 1.x. The machine used for management is referred to as the
"Management Station".
Note: You must have administrative access to your network's concentrator device to
configure the Management Interface settings
To log into the management interface:
1. Connect to the SSL312 by opening your browser and entering https://192.168.1.1 (for the
Ethernet Port 1 IP) in the address field. .
https:// 192.168.1.1
Figure 2-1
If you are connected to Ethernet Port 2 IP, the default address is https://10.0.0.1.
2. A security warning may appear. Click Yes or OK to continue. A login screen with a User
Name and Password dialog boxes will display.
Figure 2-2
3. When prompted, enter admin for the User Name and password for the Password, both in
lower case letters.
4. Select geardomain from the Domain drop-down menu.
2-2
v1.0, August 2006
Basic Installation and Configuration