Connecting The Optional Mc-Dc2 - Nikon GP-1A User Manual

Connecting the Optional MC-DC2

Connecting the Optional MC-DC2
An optional MC-DC2 remote cord for remote
shutter release can be connected to the GP-1A
accessory terminal ( ). When connecting the
MC-DC2, be sure the connector is in the correct
orientation; do not use force.
Disconnecting the GP-1A Disconnecting the GP-1A
D D
Turn the camera off , disconnect the cable, and
then replace the ten-pin terminal cap or close the
accessory terminal cover.
Mounting the GP-1A on the Camera Mounting the GP-1A on the Camera
The Camera Accessory Shoe The Camera Accessory Shoe
The GP-1A is equipped with a mount ( ) that fi ts
the camera accessory shoe. Slide the GP-1A onto
the camera accessory shoe as shown.
Page 1 of 2 Page 1 of 2
En
9