Connecting The Gp-1A - Nikon GP-1A User Manual

Connecting the GP-1A

Connecting the GP-1A
Cameras with Ten-pin Remote Terminals Cameras with Ten-pin Remote Terminals
1
Turn the camera off .
2
Insert the GP1-CA10A cable ( ) into the con-
nection terminal ( ).
3
Aligning the mark on the connector with the
mark on the camera body, insert the ten-pin
connector into the camera's ten-pin remote
terminal and tighten the locking nut.
Connecting the GP1-CA10A to a D3S digital camera
Page 1 of 2 Page 1 of 2
En
7