Nokia M5122 User Manual page 7

Nokia M5122 User Manual
Telephone and ADSL data services with T66270 splitter
4.
Figure 5
1. Plug the mains power cord to a mains outlet. M5122 can be
connected to an earthed socket outlet only.
2. Switch on M5122. The PWR indicator lights up. After a while, the
red STA indicator blinks and then remains unlit. M5122 is now
functional.
3. Connect the Ethernet cable between your PC's 10Base-T
connector and the Ethernet connector on the M5122 back panel
(ETH-1, ETH-2, ETH-3, or ETH-4).
4. Switch on your PC. The indicator corresponding the Ethernet port
you connected your PC to becomes green when your PC has
started. This indicator blinks when there is traffic in the
corresponding Ethernet port.
5. Connect the ADSL line cable between the DSL connector on the
M5122 back panel and the splitter's MODEM connector.
6. Connect the splitter cable between the splitter's LINE connector
and the wall socket. After a while, the DSL indicator starts
blinking. This indicates that the ADSL line is being established.
When the DSL indicator remains lit, the line is functional.
7. Connect the telephone to the splitter's PHONE connector.
6
1. 1.
3.
M5122 with cables and splitter (T66270) connected
(Telephone and ADSL services)
E Copyright Nokia Networks Oy
2.
5.
6.
7.
C33874002SE_A0