Bluetooth Radio Overview (Con't - Omnitron Systems Technology MAH 200 Quick Start Manual

APPENDIX D – BLUETOOTH RADIO OVERVIEW (CON'T)
Save Settings
Scan the code below to make the RF settings permanent on the reader:
Save Settings
Disconnecting from the Device
You may force disconnection by reading the disconnect code below (The MAH 200 may not
appear disconnected in the slave Bluetooth connection manager for 10 – 15 seconds after the
command is issued). The MAH 200 will also disconnect after 90 seconds of inactivity (Note: You
may change the radio frequency sleep time out setting however, it may reduce battery life).
Disconnect
Reconnecting to the Device
If the device is saved in RF mode it will automatically reconnect when:
1. MAH 200 is powered up
2. MAH 200 wakes from sleep mode
3. MAH 200 reads another code
QUICKSTART GUIDE
CODE READER MAH 200
D -6