Base Door Removal; Base Door Installation - Packard Bell EasyNote TK13BZ Service Manual

Base Door Removal

Prerequisite:
Battery Pack Removal
1. Locate base door (B) on lower cover. (Figure 3-9)
2. Remove two (2) screws (A). (Figure 3-9)
3. Remove door from lower cover.
B
C
Figure 3-9. Base Door

Base Door Installation

1. Insert door flanges into slots (B) on lower cover. (Figure 3-9)
2. Secure door to lower cover with two (2) screws (A). (Figure 3-9)
3. Install battery pack.
3-14
0
A
Machine Maintenance Procedures
0