Planet FPS-1101 User Manual page 46

SNMP Community: The print server supports up to two community names. The default
Support HP WebJetAdmin: This option allows user determine to disable/enable the
SNMP Traps: Enable the function of sending SNMP Authentication Failure trap message to
the network administrator, if the community name within a SNMP request is
not correct.
SMB Setup
The print server supports the SMB (Server Message Block) protocol, user can send the print
jobs through Network Neighborhood without installing print server's driver.
1. Click Setup, it appears the sub-menu.
2. Click SMB, it as shown in the following picture.
community name is public (case-sensitive), with Read Only access
right in default.
Support HP WebJetAdmin.
46