Planet FPS-1101 User Manual page 45

When an unusual condition or activity occurs, the SNMP agent alerts the SNMP
manager through SNMP traps. Following list summaries SNMP trap messages that the print
server will send out.
Activities/SNMP Trap Messages
Link Up or Link Down
Cold Start or Warm Start When the print server restarts, the cold start or warm start trap
Authentication Failure
In the print server's SNMP implementation, the following MIB objects are available for
updating.
MIB Object Names
system.sysContact
system.sysName
system.sysLocation
snmp.snmpEnableAuthenTraps
Users can set up print server's SNMP functions by using their browsers.
1.Click Setup, it then appears the sub-menu.
2.Click SNMP, it then as shown in the following picture.
Description
When the network interface on the print server fails, a link down
trap message is generated; if the network interface comes back
to life, a link up trap message is sent.
message is generated.
When the print server received a SNMP request with a
community name that does not match the community name the
print server is configured with (stored in the print server's
memory), an authentication failure trap message is generated.
Description
Indicates the network administrator's name.
Indicates the print server's name for identification.
Indicates the location of the print server.
Enables or disables the function of sending SNMP Authentication
Failure trap message to the network administrator, if the
community name within a SNMP request is not correct.
45