Sun Microsystems Security and Trust Services APIs 1.0 Reference Implementation Installation Manual page 13

In order to load this EEPROM image into CRef, do the following:
1. Start up a Windows 2000 command shell window.
2. Enter the following command into the command prompt, without line breaks:
C:\>%JC_HOME%\bin\cref.exe -p <port number> -i
%MIDP_HOME%\bin\jc_eeprom_image
In the command line above, the <port number> should be one of the ports specified
in the com.sun.midp.io.j2me.apdu.hostsandports property in the
internal.config file. (For more information on the internal.config file, see
"The internal.config
Once you have entered the cref.exe command above, you should see output as
shown in CODE EXAMPLE
CRef Output
CODE EXAMPLE 1
__________________________________________________________________
Java Card 2.2.1 C Reference Implementation Simulator (version 0.41)
32-bit Address Space implementation - no cryptography support
Copyright 2003 Sun Microsystems, Inc. All rights reserved.
Memory Configuration
Type Base
RAM 0x0
ROM 0x2000
E2P 0x10020
ROM Mask size =
Highest ROM address in mask =
Space available in ROM =
EEPROM (0xffe0 bytes) restored from file
"C:\satsa1.0\bin\jc_eeprom_image"
Using a pre-initialized Mask
__________________________________________________________________________
At this point, CRef is ready to receive commands and respond to MIDlet requests.
For more information on working with EEPROM images and CRef, see the
documentation for Java Card Platform Development Kit 2.2.1 Reference
Implementation.
File" in this chapter.)
1.
Size MAX Addr
0x500 0x4ff
0xa000 0xbfff
0xffe0 0x1ffff
0x578c
0x778b
0x4874
Chapter 1 Installing the SATSA Reference Implementation
22412 bytes
30603 bytes
18548 bytes
5