Table of Contents
Advertisement
Backing up your database
Distribution of backup data
Ensuring that your database is consistent
Selecting archive devices
Disk backup requirements
Tape backup requirements
380
always makes a full backup of the Catalog Store on the first archive
BACKUP
device, and then backs up the data from the IQ Store in parallel across all of the
devices you specify. Blocks are not distributed evenly across archive media.
You may have more on one device than others, depending on the processing
speed of individual threads.
Note
The distribution of backup data is important because sets of files must be
restored in the order in which they were backed up. See "Restoring in the
correct order" on page 403 for more information.
Although Backup does check that all necessary files are present before backing
up your database, it does not check internal consistency. For a more thorough
check, you can run the stored procedure
See "Validating your database" on page 393 for details.
You can back up any IQ database onto either disk or magnetic tape. Adaptive
Server IQ supports backup and restore using multiple tape drives at near device
speeds, or to multiple disks if disk striping is in use. You specify the backup
device name in the archive_device parameter of the
Disk backups must go to a file system; raw disk is not supported as a backup
medium. All disks on a RAID device are treated as a single device.
If you regularly back up large databases, you should use DLT drives, if they are
supported for your platform. In any case, Sybase recommends that you use
multiple tape drives.
Adaptive Server IQ
BACKUP
•
Digital Linear Tape (DLT) on UNIX systems
before making a backup.
sp_iqcheckdb
BACKUP
can support the following tape drives:
command.
Advertisement
Table of Contents
