Manual Calibrating Mode - Tash SCATIR 51300 User Manual

4. Manual Calibrating Mode

When in manual calibrating mode, the activation distance is set by the user.
1. Turn the sensor box off.
2. Set the dip switches to:
3. Position the sensor.
4. Place the activating body part just beyond the desired activation
distance.
5. Turn the sensor box on.
6. Press the set switch beside the Dip Switches with the end of a pencil
until you hear three beeps and the valid light flashes three times.
7. The manual calibrating mode is now set.
SW3 Up
SW4 Down
9